Plasma BAR Series

The Plasma BAR is a commercial quality, remote mounted needlepoint ion generator intended for installation in air handling units (AHU) and rooftop units (RTU). The Plasma BAR is available in lengths of 18 inches up to 96 inches in 6 inch increments to suit a wide variety of AHU or RTU size applications. This unit is UL2998 validated for zero ozone emissions.

VOLTAGE
24V AC or 12V DC. Power supply provided for 120V – 230V. Transformer provided for 277V.

ENERGY USE
1.5 watts/LF

CAPACITY
Up to 20,000 CFM. Multiple BARs can be used.

NO. OF IONIZATION OUTLETS
1 outlet every 6.0″

Category:

Description

The Plasma BAR needlepoint ionizers produce positive and negative ions neutralizing harmful micro-organism, pollutants and odors and are arranged in a factory assembled low profile design for ease of installation. They are typically installed on upstream side of cooling coil but can be located downstream near supply fan section with a contractor provided support system. To ensure optimal performance the Plasma Bar series require minimal annual maintenance and cleaning. This unit is covered under UL 2998 for zero ozone emissions of less than 5 ppb.

SPECIFICATIONS:

Housing Material: . . . . . . . . . . . . . . . .18 Gauge Galvanized Steel
Maximum Operating Temperature: . . . . . . . . . . . . 200ºF (93ºC)
Mode of Operation: . . . . . . . . . . . . . . . . . . . . Needlepoint type
Needle Configuration: . . . . . . . . . . . . . . . . . . . . . . . . . Recessed
Mounting: . . . . . . . . . . . . . . . . . . . . . . . . . . . Top angle brackets
Pressure Drop: . . . . . . . . . . . . . . . . . . . . . . . . . . . . .<0.05″ W.G.
Approvals: . . . . . . . . . . . . . . . . . . .Intertek/ETL Standard UL867
. . . . . . . . . . . . . . . . .UL 2998 “No-ozone” Validation

CONTROL PANEL (CP):

Dimensions . . . . . . . . . . . . . . . . . . . 6.5″ (l) × 6.5″ (w) × 3.5″ (d)
Direct Input Voltage. . . . . . . . . . . . . . . . . . .12V DC or 24V AC
Input Voltage requiring power supply . . . . . . . . . .120/230V AC
Frequency. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50/60 Hz
Over-current Protection . . . . . . . Automatic Reset 1 Amp fuse
Length of wiring harness from CP to BAR . . . . . . . . . . . .20′ – 0″
Interconnecting Voltage to BAR . . . . . . . . . . . . . . . . . . 12V DC
Environmental Service . . . . . . . . . . . . . . . . . . . . . . . Indoor only

Reviews

There are no reviews yet.

Be the first to review “Plasma BAR Series”

Your email address will not be published. Required fields are marked *

Download Plasma Air BAR Submittal

Download

Related products